Smart Cruise Control (SCC) with Stop and Go System*
7
SCC is designed to maintain a predetermined distance from vehicles detected ahead by
automatically adjusting the driving speed as needed. With SCC on and activated, and the
vehicle distance set, the system can slow or bring the vehicle to a complete stop when slowing
or stopped traffic is detected ahead.
When stopped traffic ahead starts to move forward, SCC re-engages. However, if the vehicle
ahead stops for more than 3 seconds, SCC must be re-engaged by depressing the accelerator
pedal or operating the [+], [-] or
B
switch.
To engage SCC and set/adjust the speed:
• Press the button
A
to turn the system ON and set to the current speed. The CRUISE indicator,
set speed, and vehicle distance will illuminate on the Instrument Cluster.
• Increase the set speed by pressing the [+] switch
B
up
• Decrease the set speed by pressing the [-] switch
B
down
To pause or resume SCC operation: Press the pause/resume button
B
. The SCC indicator on the
Instrument Cluster will turn OFF.
To set the vehicle-to-vehicle distance: Press the Vehicle Distance button
C
on the steering
wheel. The image on the LCD screen
D
will change when scrolling through the settings.
To turn SCC system OFF: Press the Driving Assist button
A
.
Navigation-based Smart Cruise Control (NSCC)*
8
NSCC can automatically adjust the SCC’s set vehicle speed according to speed limits and known
curves on limited-/controlled-access highways using information from the Navigation System.
To enable NSCC: Go to Vehicle Settings in the infotainment system, select Driver Assistance,
then Driving Convenience, then Highway Auto Speed Change.
When SCC is on and operating and the vehicle is driving on limited-/controlled-access highways,
NSCC will be indicated by the illuminated WHITE NAV icon
A
on the Instrument Cluster.
When NSCC detects a curve ahead, the system activates and reduces the vehicle speed, and the
NAV icon
A
will turn GREEN. When the vehicle passes the curved road, the vehicle may return
to its previously set SCC speed.
Autoset (Automatic change of set speed):
If SCC is set to the current speed limit on the highway during NSCC operation, the set speed is
changed automatically whenever the speed limit changes.
Reminders:
• NSCC requires an active Kia Connect subscription.
5
• NSCC is only available on limited-/controlled-access roads and highways.
Lane Keeping Assist (LKA)
7
and Lane Following Assist (LFA)
7
LKA is designed to detect the lane markers on the road and help alert the driver or assist in
steering to potentially help keep the vehicle in the lane. LFA is designed to help the vehicle stay
centered in its lane
A
by monitoring the detected lane markings ahead and adjusting the steering.
To enable LKA and/or LFA: Go to User Settings
in the Instrument Cluster LCD, OR press and
hold the Mode button
B
on the right side of the steering wheel, OR press the SETUP key/
button on the infotainment system. Select the Vehicle button to enter the Vehicle Settings, then
Driver Assistance, then Lane Safety.
Once enabled, press and hold the Lane Safety Button
C
to turn either system on or off. When
on, the Lane Safety icon on the Instrument Cluster will illuminate WHITE while the system does
not detect the lane markers. When the system detects the lane markers and can assist the
steering, the icon will turn GREEN
D
.
LFA Hands-off Warning: If the driver removes their hands from the steering wheel for several
seconds, a warning message will appear on the Instrument Cluster, and an audible warning will
sound. If the driver’s hands are not replaced on the steering wheel, LFA will cancel.
LKA will operate only when these conditions are met:
• The vehicle speed exceeds approximately 40 mph.
• LKA recognizes the lane the vehicle is traveling in.
• The vehicle is between the lane markers.
LFA will operate only when these conditions are met:
• LFA recognizes both sides of the lane markers the vehicle is traveling in.
• The vehicle is traveling slower than 110 mph.
Forward Collision-Avoidance Assist (FCA)
7
FCA is designed to warn the driver when a collision with a vehicle, pedestrian, or cyclist in the
roadway is imminent and, if necessary, temporarily apply emergency braking.
Initially, FCA provides a Forward Collision Warning (FCW) when it detects a potential collision,
emitting an audible warning and visual alert on the Instrument Cluster
A
. If the system detects
that the collision risk has increased, FCA automatically applies the brakes to decrease vehicle
speed
B
, potentially helping to reduce the effects of a possible collision.
To enable/disable FCA: Go to User Settings, select the Vehicle button, then Driver Assistance,
then Forward Safety.
To adjust the FCA initial warning activation time: Go to Vehicle Settings on the infotainment
system, select Setup, then Driver Assistance, then Warning Timing, then Standard or Late,
depending on your preference.
FCA/FCW will operate only when these conditions are met:
• Ignition is on or the Power button* is ON.
• Vehicle is traveling faster than 3 mph.
• Electronic Stability Control (ESC) is ON.
Smart-Power Liftgate Operation*
9
From outside the vehicle: Open by pressing the Rear Hatch Release button
A
on exterior of the
liftgate, and close by pressing the Power Liftgate Close button
B
.
From inside the vehicle: Open by pressing and briefly holding the Power Liftgate Open/Close
button
C
, and close by pressing and holding the button
C
until liftgate is completely closed.*
Using Smart Key: Open by pressing and holding the liftgate button
D
until the liftgate begins
opening, and close by pressing and holding the button
D
until liftgate is completely closed.*
*If button is released while closing, the liftgate will stop and a chime will sound.
To set the opening height: Go to Vehicle Settings OR press the Setup key/button on the
infotainment system, select Vehicle, Door, then Power Liftgate Opening Height, OR manually
position the liftgate to the preferred height, then press and hold the Power Liftgate Close button
B
more than 3 seconds. A system beep will sound twice indicating the height setting has been saved.
Reminders:
• Pulling the Rear Hatch upward by the handle or pressing the button a second time will
interrupt the automatic opening of the Power Liftgate.
• When opening or closing, be mindful of any objects or persons that may be in the way.
60
OK
B
C
A
D
Collision Warning
Emergency Braking
A
B
HOLD
HOLD
A
(Located on Liftgate
inside lip near latch)
(Button located on Driver’s Panel)
B
C
D
(Buttons located on right side of steering wheel)
60 MPH
D
NAV
A
(Display on LCD screen)
A
OK
D
C
B
(Buttons located on right side of steering wheel)