Wavelink's TE Client for Android User Guide



Wavelink's TE Client for Android

User Guide

Version 1.3



Revised 02/12/2013

LANDesk and its logos are registered trademarks or trademarks of LANDesk Software, Inc. and its affiliates in the United States and/or other

countries. Other brands and names may be claimed as the property of others.

Website: http:\\www.wavelink.com

LANDesk does not warrant that this document is error free and retains the right to make changes to this document or related product

specifications and descriptions at any time without notice. LANDesk does not assume any obligation to update the information contained

herein. This document is provided “AS IS” and without any guaranty, warranty, or license, express or implied, including but not limited to:

fitness for a particular purpose, merchantability, non infringement of intellectual property, or other rights of any third party. Any LANDesk

products referenced in this document are not intended for use in medical, life saving, or life sustaining applications. Third parties may have

intellectual property rights relevant to this document and the technologies discussed herein.

Chapter 1: Installing and Licensing 1

Chapter 1: Installing and Licensing

TheTerminalEmulation(TE)Clientisanapplicationinstalledonamobiledeviceortabletthat

connectstoIBM5250/3270,VT100/220,andXTERMhosts.TheClientusestheTelnetorSSH

protocolstoconnecttotheremotehostandemulatestheterminal.

TheTEClientuseshostprofilestoconfigurethehostinformation.Emulationparameters

definehowtheClientactsduringtheemulationsession,suchasthebeepvolumeorwhatto

doifthescanneddataislargerthantheentryfield.TheTEClientforAndroiddoesnothave

thesameoptionsasTEClientsforWindowsoperatingsystems.

TheTEClientforAndroidhasbeenoptimizedforanAndroidOS,andincludesthecapability

toconfiguretheClientfromthedevice.Clientmenusandkeyboardshavebeentailoredfor

Android.TheClientscreenzooms,pans,andreorientsbasedondeviceorientation.This

manualintroducestheoptionsandtasksavailablewithaTEClientforAndroid.

TheTEClientislicensedeithermanuallyforeachdevice,orbyusingaWavelinklicense

server.ContactWavelinkCustomerSupporttoobtainlicenses.

TheClientcanalsobeconfiguredtoconnecttoahostthroughaWavelinkConnectProproxy

server.ConnectProisanoptionalcomponentofTerminalEmulationthathandlessession

persistence.ConnectProactsasaproxybetweenthemobiledeviceandtheemulationhost.If

thedevicelosesconnectivityorgoestosleep,theConnectProservermaintainsthesession

untilthedevicereconnects.ConnectProisfreewithTerminalEmulationbutisinstalled

separately.ForinformationoninstallingandusingConnectPro,seetheConnectPro User Guide

ontheWavelinkWebsite.

ThissectionhasinstructionsforinstallingandlicensingtheTEClient:

•InstallingtheTEClientonAndroid

•LicensingtheTEClient

•UninstallingtheTEClient

Installing the TEClient on Android

InordertoinstalltheTEClientforAndroidonadevice,thedevicemustbeconfiguredto

allowinstallationofnon-Marketapplications.UsetheQRcodebelowortheURLtodownload

andinstalltheapp.TheTEClientforAndroidisconfiguredfromthemobiledeviceafteritis

installed.

NOTE:IfyouhaveapreviousversionoftheTEClientinstalled,youmustuninstallbefore

installingthenewversion.

Chapter 1: Installing and Licensing 2

To install the TE Client for Android:

1Configurethedevicetoallowinstallationofnon-Marketapplications.(Thisoptionis

oftenunderSettings > Applications.)

2Usingthedevice,scantheQRcodeoropenabrowserandnavigateWavelinkdownloads

page.TheTEClientsforAndroidarelistedundertheUniversalClients.Downloadthe

latestClient.

https://www.wavelink.com/Orders/files/WLTE_UNIVERSAL_ANDROID_1_3_08_3322.apk

ThedevicedownloadstheClient.

3ViewthedeviceNotificationsbypullingdownthestatusbar.Thedownloadstatusofthe

Clientfileisdisplayed.WhentheClientdownloadiscomplete,tapthenotificationto

installtheClient.

4Theinstallationscreenappears.TapInstall.

5Theappisinstalled.TapOpentolaunchtheTEClient,ortapDone.

Licensing the TEClient

TheTEClientrequiresalicenseforfullfunctionality.Emulationlicensesmaybespecifictoan

emulationtype(forexample,alicensecanbeissuedforVTemulationorIBMemulation).

TherearetwotypesofTEClientlicenses:platformlicensesandmaintenancelicenses.

•Platform licenses.Aplatform(orbase)licenseauthorizesyoutouseaversionofthe

TEClientandanybuildsassociatedwiththatversion.Forexample,ifyoupurchaseda1.0

TEClientlicense,thenyouareentitledtouse1.00-xxbuilds.Ifyouwanttoupgrade

beyondaversion1.0TEClient,thenyoumusteitherbuyanewplatformlicenseor

purchaseamaintenancelicense.Platformlicensesdonotexpire,buttheydonotallowyou

toupgradetoanewerversionoftheTEClient.

•Maintenance licenses.AmaintenancelicenseallowsyoutoupgradeyourTEClient

whennewmajorversionsoftheTEClientbecomeavailable.Forexample,amaintenance

licensewouldallowyoutoupgradefromTEClient1.xtoTEClient2.x.Youmusthavea

baselicenseforeachmaintenancelicenseinuse.

Chapter 1: Installing and Licensing 3

Maintenancelicensesarevalidonlythroughaspecificdate.Aftertheexpirationdate,if

youupgradetheTEClient,itwillreverttooperatingindemomode.

YoucanusetheClientwithoutalicense,butyouwillbelimitedtothedemomodewithout

fullfunctionality.Whenyouattempttoinitiateaterminalemulationsession,theTEClientwill

beginbroadcastinginanattempttolocatealicenseserver.Atthatpoint,youarepromptedto

eitherenteralicenseortoinitiatethesessionindemomode.Whileindemomode,youmay

initiateterminalemulationsessionswithhosts.However,eachterminalemulationsessionthat

youinitiatewillautomaticallydisconnectafteronehour.

TherearetwowaystolicensetheTEClient:

•Manual licensing.UsetheTEClientinterfaceonthemobiledevicetomanuallyinput

licensinginformation.

•License Server.UseaLicenseServertoautomaticallyprovideTEClientlicensestothe

mobiledevicesonyournetwork.

NOTE:ToobtainTerminalEmulationlicenses,pleasecontactWavelinkcustomerservice.

Thissectionprovidesthefollowinginformation:

•ManuallyLicensingtheTEClient

•UsingtheLicenseServertoLicensetheTEClient

Manually Licensing the TEClient

YoumaykeyinyourauthorizationinformationmanuallythroughtheTEClientinterfaceon

themobiledevice.Whenyoumanuallyassignlicenses,eachdeviceisassociatedwithaunique

UserNumber.Forexample,tolicense50devices,Wavelinkwouldissuealicensewithauser

limitof50.Eachofthe50deviceswouldhaveadifferentUserNumber,from1to50.

Whenyoumanuallyconfigurethelicensinginformation,youmusthavethefollowing

information:

Platform Theemulationtype.

Licensee Name ThenameofthepersonorcompanyforwhichtheClientislicensed.

Serial Number Theserialnumberforthelicense.

Expiration Date TheexpirationdateofthelicenseintheformatofMMDDYYYY.

Authorization Code Theauthorizationcodeforthelicense.

Chapter 1: Installing and Licensing 4

User Number Anumberuniquetothedevice.Itcanbeanynumberbetween1and

themaximumnumberofusersforwhichthelicenseprovides.

User Limit Themaximumnumberofusersforthelicense.

To manually license a TEClient:

1Onthedevice,launchtheTEClient.

2AddalicensebytappingMenu > More > Authorization.

3TapAdd New License.

4Providethelicenseinformationinthetextboxes.

5TapAdd License.

Using the License Server to License the TEClient

TheclientlicenseserverisaWavelinkapplicationthatisresponsibleforsupplyinglicensesto

mobiledevicesthatareusingtheTEClient.

NOTE:TheclientlicenseservershouldnotbeconfusedwiththeAvalanchelicenseserver.

TheyareseparateWavelinkapplications.

Forinformationaboutinstallingandconfiguringtheclientlicenseserver,seetheTerminal

Emulation License Server Reference GuideontheWavelinkWebsite.

Whenyouusethedevicetoattempttoinitiateanemulationsessionwithahost,anunlicensed

Clientautomaticallyattemptstoobtainalicensefromalicenseserver.

To use the license server to obtain a license:

1WhenyouattempttoconnecttoahostusingtheTEClient,itbroadcastsarequestfora

licenseonthelocalIPnetwork.Or,ifyouhaveconfiguredthelicenseserveraddress,the

Clientsendsarequesttothespecifiedlicenseserver.

2Licenseserverswithanavailablelicenserespondbyofferingalicense.

3TheTEClientacceptsthefirstlicensethatitreceivesandsendsareplytothelicense

server.

Uninstalling the TEClient

UninstalltheTEClientforAndroidfromthedevice'sSettingsmenu.

To uninstall the TE Client for Android:

1Onthedevice,navigatetoSettings > Applications > Manage Applications.

2TapTerminal Emulation Client.

Chapter 1: Installing and Licensing 5

3TapUninstall.

4TheTEClientisuninstalled.

Chapter 2: Using the TEClient 6

Chapter 2: Using the TEClient

OncetheTEClienthasbeeninstalled,theTerminalEmulationappwillappearinthelistof

installedapps.TolaunchtheClient,taptheTerminalEmulationicon.TheTEClientworks

witheitherapairedBluetoothscanneroracamerainthedevice.Whenyouscandata,it

appearsinthecurrentlyselectedfield.

•ToexittheClient,tapMenu > Exit.

•Toconnecttoahost,tapthemainscreenortapMenu > Connect.Youwillbeableto

selectthehostprofilefromthelistthatappears.

•Todisconnectanemulationsession,tapMenu > Disconnect.

•Tousethecamerascanner,tapMenu > Scan.Whenyouhavescannedthebarcode,the

camerainterfaceclosesandtheemulationscreenreappears.

Chapter 3: Configuring the TEClient 7

Chapter 3: Configuring the TEClient

YoucanconfiguretheTEClienteitherthroughWavelinkAvalancheorthroughtheinstalled

Clientonthedevice.YoudonotneedtohaveAvalanchelicensesinordertouseAvalancheto

configuretheTEClient.

Fordetailsaboutthehostprofileoptionsandemulationparametersavailable,seethesections

below.

•ConfiguringtheTEClientusingAvalanche

•ConfiguringHostProfiles

•ConfiguringEmulationParameters

Configuring the TEClient using Avalanche

UseanAvalanchepayloadtoconfigureSSLcertificates,hostprofiles,oremulationparameters

foranAndroiddevice.Youcanconfiguremultiplehostprofilepayloadsforeachdevice,but

onlyoneemulationparameterspayload.

ToconfiguretheTEClientusingAvalanche,youdonotneedtohaveAvalanchelicenses.

To configure the TEClient when the device has an Avalanche license:

1LogintotheAvalancheConsole.

2Navigatetothefolderwhereyouwantthepayloadcreated.

3FromtheProfilestab,clickAdd PayloadintheAvailablePayloadspanel.

4ThePayloaddialogboxappears.SelecttheAlloption,andthenthetypeofpayloadyou

wanttocreate.

5ConfiguretheoptionsasdesiredandclickSave.

6FromtheProfilestab,clickAdd ProfileintheAvailableProfilespanel.

7TheNew Profiledialogboxappears.ClickApplication Configuration.

8Createanamefortheprofile,thenselectthepayloadorpayloadsyouwanttoassociate

withtheprofile.Saveyourchanges.

9SelectthecheckboxnexttothenameoftheprofileandclickApplyintheAvailable

Profilespanel.

10Deployyourchanges.

Thenexttimethedevicechecksin,thepayloadisdownloaded.WhentheTEClientis

launched,thenewsettingsareappliedandthehostprofilesareavailable.

Chapter 3: Configuring the TEClient 8

To configure theTEclient when the device does not have an Avalanche license:

1LogintotheAvalancheConsole.

2Navigatetothefolderwhereyouwantthepayloadcreated.

NOTE:IntheAvalanchenavigationtree,thereisaDefaultdevicefolder.Ifallofyour

devicesareusingthesameconfiguration,youmaywanttousetheDefaultfolder.However,

ifyouhavedevicesusingdifferentconfigurations,createaseparatefolderforeach

configuration.

3FromtheProfilestab,clickAdd PayloadintheAvailablePayloadspanel.

4ThePayloaddialogboxappears.SelecttheAlloption,andthenthetypeofpayloadyou

wanttocreate.

5ConfiguretheoptionsasdesiredandclickSave.

6FromtheProfilestab,clickAdd ProfileintheAvailableProfilespanel.

7TheNew Profiledialogboxappears.ClickApplication Configuration.

8Createanamefortheprofile,thenselectthepayloadorpayloadsyouwanttoassociate

withtheprofile.Saveyourchanges.

9SelectthecheckboxnexttothenameoftheprofileandclickApplyintheAvailable

Profilespanel.

10Deployyourchanges.

11IntheNavigationTree,clicktheViewbuttontoviewthefolderdetails.

12OntheFolderDetailspage,clickPrint QR Code.

13TheQRcodeforthepayloadsappliedtothefolderappearsinthebrowser.

14Onthedevice,launchtheTEClient.

15IftheTEClientpromptsyoutoscantheQRcode,clickOKandscantheQRcode.

Otherwise,presstheMenubutton.Whenthemainmenuappears,tapMore > Server

Configuration > Scan Server AddressandthenscantheQRcode.

ThedeviceconnectstotheAvalancheserverandpullstheconfigurationinformation

associatedwiththefolder.

Configuring Host Profiles

AhostprofiledefinesthesettingsthattheTEClientshouldusewhenitattemptstoinitiatea

connectionwithaspecifichost.Thehostprofilemayincludetheemulationtype,IPaddressof

Chapter 3: Configuring the TEClient 9

thehost,IPaddressoftheTermProxy/ConnectProserver,orothersettings.Youmay

configureanunlimitednumberofhostprofiles.

Whenadeviceuserattemptstoinitiateasessionwithahost,theTEClientdisplaysalistof

availablehostprofiles.Theuserselectsthehosthewantstoconnectto,andtheTEClientuses

thehostprofilesettingstoconnecttothehost.

Dependingontheemulationtype,therearedifferentoptionsavailablewhenconfiguringa

hostprofile.Thefollowingoptionsmaybeavailablewhenyouconfigureahostprofile:

Profile Name

Profilename Thenameofthehostprofile.

Basic Settings

Type Theemulationtypethatthemobiledeviceuseswhenconnectedtothehost

system.

Address TheIPaddressorhostnameofthehostsystemtowhichthemobiledevice

willconnect.

Port TheTCPportnumberonwhichthehostsystemislisteningforemulation

requestsfromClients.

Onlyuse

TermProxy

connections

IndicateswhethertheTEClientshouldonlyconnecttothehostthrougha

TermProxyorConnectProserver.Ifyouenablethischeckbox,youmust

configurethehostinformation(name,IPaddress,emulationtype,andport).

UseSSL/TLS

encryption

UsesSSL/TLStoencrypttheinformationsenttothehost.Thereisno

additionalsoftwareforSSL/TLSontheAndroiddevice,butthehostmustbe

configuredforSSL/TLS.

WhenyouenableSSL/TLSencryption,youmustuseacertificate.Tapthe

Manage Certificatesbutton,thentapInsert Certificate.Tapthenameof

thecertificateinthelistandthenAccept Certificate.

NOTE:Thecertificatemustbesavedas certificates.pem on

thedeviceintherootdirectoryofthefirstlistedmountedstorage

(notpartoftherootfilesystem).Thismaybeinternalstorageoran

SDcard.

UseSSH

encryption

UsesSSHtoencrypttheinformationsenttothehost.Thereisnoadditional

softwareforSSHonthedevice,butthehostmustbeconfiguredforSSH.

Chapter 3: Configuring the TEClient 10

SSH Settings

Tunnel

Telnetusing

SSHLocal

Port

Forwarding

Setswhetherornottousetunneling.Ifyouareusing5250emulationwith

SSH,youmustuseSSHtunneling.

Address TheIPaddressorhostnameforSSHtunneling.

Port TheTCPportnumberforSSHtunneling.

UserName TheusernameforSSH.

Password ThepasswordforSSH.

TermProxy Settings

Type TheversionnumberoftheTermProxyorConnectProserver.

Address TheIPaddressorhosthameoftheproxyserver.

Port TheTCPportnumberonwhichtheproxyserverislisteningforemulation

requestsfromClients.

Terminate

TermProxy

Session

IndicateswhentheConnectProorTermProxyservershouldterminatethe

connectiontothehost.

PossibleValues:

• Never.Theproxyserverneverterminatesthesessionestablishedwith

thehost.TheClientisresponsibleforterminatingthesession.

• On Network Error.Theproxyserverterminatesthesessionwiththe

hostwhenanetworkerroroccurs,suchasalossofnetwork

connectivity.

• On Session Exit.Theproxyserverterminatesthesessionwiththehost

whenthesessionisterminatedbytheClient.

• Always.Theproxyserverwillterminatethesessionwiththehostona

networkerrororwhenthesessionisterminated.

Client

Reconnectsif

Unexpectedly

Disconnected

SpecifiesiftheClientwillattempttoreconnectifthesessionwiththeproxy

serverislostandtheClienthasnotreceivedadisconnectmessagefromthe

proxyserver.

Chapter 3: Configuring the TEClient 11

TermProxy Settings

Reconnect

string

Specifiesthereconnectstringthatthemobiledeviceshouldusewhen

connectingtothehost.(Alternately,youmayconfigurereconnectstrings

inTermProxyorConnectPro.)

IBMSettings

Workstation

ID(5250)

-Or-

LUorPool

Name(3270)

AnIDformobiledevicesconnectingtoanIBMhost.TheIDmayinclude

staticcharactersandthefollowingswitches,whichareusedtocapture

dynamicdataspecifictoeachmobiledevice:

• %a - %d.CapturesspecificoctetsoftheIPaddressofthemobiledevice.

Forexample,use %a%b%c%d tocaptureallfourIPoctetsoftheaddress

ofthemobiledevice,oruse%dtocaptureonlythelastoctetoftheIP

addressofthemobiledevice.

• %m - %r.CapturesspecificoctetsoftheMACaddressofthemobile

device.Forexample,use %p%q%r tocapturethelastthreeoctetsofthe

MACaddressofthemobiledevice.

• %s.Capturesthesessionnumber.

• %t.CapturestheAvalancheterminalIDofthemobiledevice.(Ifthe

mobiledevicedoesnothaveanAvalancheEnabler,thenthisparameter

isnotvalid.)

AworkstationIDcanbe1-20alphanumericcharactersplusswitches,but

IBMhostsusuallytruncateworkstationIDsthataremorethan10

characters.TheworkstationIDshouldnotbeginwithanumericcharacter.

VTSettings

Telnet

Negotiation

String

ATelnetnegotiationstringforthehostconnection.ATelnetnegotiation

stringisusedtoidentifyamobiledevicetoahostsystemandtopresenta

Clientwiththeappropriateemulationoptions.Thehostsystemcanthen

supplyinformationtothemobiledevicebasedonTelnetnegotiationstring

(forexample,menusordisplayoptions).Thestringcanbe1-20alpha-

numericcharacters.

Autologin with IBMHOST

UserName TheusernametheClientshouldusewhenconnectingtothehost.

Password ThepasswordtheClientshouldusewhenconnectingtothehost.

Chapter 3: Configuring the TEClient 12

Autologin with IBMHOST

Program/

Procedure

Aprogram/procedurethatshouldrunwhentheClientconnects.

Menu ThenameofthemenuyouwantdisplayedwhentheClientconnects.

Current

Library

ThenameofalibrarytheClientshouldnavigatetowhenitconnects.

Autologin withVT

 Prompts CFGinTerminal Responses

Name Theusernameprompt

thatthehostsystemuses.

Possible Values:0-60

alpha-numericcharacters

Ifusersshould

configuretheresponse

totheloginpromptat

themobiledevice.

Possible Values:

Theresponsethatthe

mobiledeviceshould

sendtotheloginprompt.

Possible Values:0-30

alpha-numericcharacters

Password Thepasswordprompt

thatthehostsystemuses.

Possible Values:0-60

alpha-numericcharacters

Ifusersshould

configuretheresponse

tothepassword

promptatthemobile

device.Possible

Values: <Enabled>

Thepasswordthatthe

mobiledeviceshould

sendtothehostsystemat

thepasswordprompt.

Possible Values:0-30

alpha-numericcharacters

Command Thecommandprompt

thatthehostsystem

sendstotheTEClient

aftertheloginis

complete.Possible

Values:0-60alpha-

numericcharacters

Ifusersshould

configuretheresponse

tothecommandline

promptatthemobile

device.Possible

Values: <Enabled>

Thecommandthatthe

mobiledeviceshould

sendthehostsystemat

thecommandprompt.

Possible Values:0-30

alpha-numericcharacters

Autolaunch

AutoLaunch

Session

TheClientattemptstoconnecttothespecifiedhosteachtimetheClientis

launched.Onlyonehostprofileonthedeviceshouldhaveautolaunchset.

To configure a host profile from the device:

1FromtheTEClient,tapMenu > Host Profiles.

Chapter 3: Configuring the TEClient 13

2Ifthepasswordisrequired,typethepasswordinthetextboxandtapOK.(Thedefault

passwordis system.)

3ClickAdd Newtocreateanewhostprofile,ortapthenameoftheexistinghostprofile

thatyouwanttoedit.

4ConfiguretheoptionsasdesiredandtapSave.

5PresstheBackbuttontoreturntothemainClientscreen.

Configuring Emulation Parameters

EmulationparametersdefinehowtheTEClientbehaveswhileitisconnectedtoahost.This

includessoundsandspecialkeyfunctions,aswellasthepasswordsforconfiguringtheClient.

Dependingontheemulationtype,therearedifferentoptionsavailablewhenconfiguring

emulationparameters.Thefollowingoptionsmaybeavailable:

5250 and 3270 Options

EnterKeySwapped UsestheEnterkeyasSendinsteadofFieldExit.Thisoptiondoesnot

affectthekeysontheTEvirtualkeyboards.

EnablerFreeCursor Allowstheusertomovethecursorintoprotectedareasofthescreen

aftertheyusethekeyboardtotoggleFreeCursormode.

OversizedScanning Determineswhattodoifscanneddataistoolargefortheentryfield.

Retry

WorkstationID

AllowstheTEClienttoretrytheworkstationIDwithaletter

appendedtoit.

UseEnterasReset UsestheEnterkeyasaResetkeyiftheterminalisinanerrorstate.

InitialCapsLock

state

SetsthekeyboardtoopenwithCapslockonwhenenabled.

VTOptions

BackspaceKey

SendsDelete

Sendsadelete<7F>insteadofabackspace<08>whenthebackspace

keyispressed.

Ignore8-bit

ReceivedControl

Codes

Treats8-bitcontrolcodesasextendedcharacters.

NewAnswerBack DisplaysastringonthemobiledevicewhenitreceivesanENQfrom

thehost.Itsupportsthefollowingvariables:

Chapter 3: Configuring the TEClient 14

VTOptions

• %m-%rrepresentingthesixoctetsoftheMACaddress.

• %a-%drepresentingthefouroctetsoftheIPaddress.

• %srepresentingthesessionnumber.

• %trepresentingtheterminalID(Avalancheonly).

Forexample,ifyouwanttheresponsetoanENQtobethefullMAC

address,use:

%m%n%o%p%q%r

VTLineMode Simulateslinemodebehaviorforhoststhatdonotsupportit.

InitialCapsLock

State

SetsthekeyboardtoopenwithCapslockonwhenenabled.

LocalEcho Specifieswhethertheterminaluseslocalechotoreflectwhatissentto

thehost.

ScanTerminator Setsinformationappendedeachtimescanneddataisentered.

 Authorization Settings

LicenseServerPort TheporttheLicenseServerwillbeusingtoprovidelicenses.

LicenseServerSite

TheSiteIDtousewhenrequestinglicensesfromtheLicenseServer.

Network Settings

UseTimingMark

Heartbeat

Sendstimingmarkstothehosttodetermineifthesessionisstillalive.

Log

NetworkActivity

Createsalogofnetworkactivityforthesession.Thelogisstoredin

thefirstlistedmountedstorageonthedevice(notpartoftherootfile

system).ThismaybeeitherinternalstorageoranSDcard.

LogFileMaxSize

(kB)

Themaximumsizeofthesessionlogfile.Whenthelogreachesits

maxfilesize,thecurrentcontentsarewrittentoabackuplogfileand

anewlogfileisstarted.Ifabackuplogfilecurrentlyexists,itis

overwritten.

Chapter 3: Configuring the TEClient 15

 Passwords Settings

Advanced

Password

Setsthepasswordforconfiguringhostprofiles.

Configuration

Password

Setsthepasswordforconfiguringemulationparameters.

Scanner Setting

AutoSendScans Automaticallysendstothehostafterabarcodeisscanned.This

optionisfor5250and3270emulationonly.

Screen Settings

LockScreen

Orientation

Locksscreentodefaultorientationfordevice.

FixedScreenMode Eachtimeascreenisreceivedfromthehost,thescreenissetto

displayrow1,column1intheupperleftcorner.

DefaultFontSize Setsthezoomlevelwhenconnectedtothehost.Whenthisissetto0,

theClientwillcalculateanoptimumsize.

Disablepanand

zoom

Disablestheabilitytopanandzoomwhenconnectedtoahost.

KeyboardHeight

(portrait)

Setstheheightoftheonscreenkeyboardasapercentageofthescreen

whenthedeviceisinportraitorientation.

KeyboardHeight

(landscape)

Setstheheightoftheonscreenkeyboardasapercentageofthescreen

whenthedeviceisinlandscapeorientation.

HideAndroid

Titlebar

HidestheAndroidtitlebar.

Sounds Settings

BeepVolume Setsthevolumeofthebeeper.

IncomingScreen

Beep

Beepswhenanewscreenissentfromthehost.Thisoptionisfor5250

and3270emulationonly.

SilentMode DisablesallTEClientbeeping.

To configure a host profile from the device:

1FromtheTEClient,tapMenu > Emulation Parameters.

Chapter 3: Configuring the TEClient 16

2Ifthepasswordisrequired,typethepasswordinthetextboxandtapOK.(Thedefault

passwordis config.)

3ConfiguretheoptionsasdesiredandtapSave.

4PresstheBackbuttontoreturntothemainClientscreen.

Wavelink Contact Information 17

Wavelink Contact Information

Forproductdownloadsordocumentation,gototheWavelinkdownloadspage:

http://www.wavelink.com/download-software

ForinformationoncontactingWavelink,pleasegoto:

http://www.wavelink.com/Customer-Care-Contact-Customer-Care