smart wristband
user's manual
Wear it properly
The wristband is best worn after the ulnar styloid
Adjust the size of the wrist according to the adjustment
hole；Buckle belt buckle。
The sensor should be close to the skin to avoid moving。
Charge the bracelet
For the first time, make sure that the battery is in
normal power. If the power is not turned on normally,
please connect the charger to charge the device, and
the bracelet will automatically turn on.
Install the bracelet app on your phone
Scan the QR code or go to the App Store, app download
and install the app
Android/IOS
System Requirements ： Android 5.0 or above; iOS9.0 or
above;Support for Bluetooth 4.0.
Device connection
For the first use, you need to connect to the APP for calibration.
After the connection is successful, the bracelet will
automatically synchronize the time
Turn on the Bluetooth switch of the mobile phone system →
enter the app device module settings → click "bind device,
experience more functions" to enter, it will automatically
search for the nearby Bluetooth device, find the bracelet
device and connect it.
After the pairing is successful, the APP will automatically
save the Bluetooth address of the bracelet.When the APP is
opened or running in the background, it will automatically
search and connect the bracelet;
Android phones use all notification permissions such as
contact information and mobile app settings to run in the
background
Bracelet function description
When the device is turned off, touch and hold the function
button for more than 3 seconds to turn the device on
More menu-long press the shutdown menu to enter the shutdown
interface
Under the power on state, touch the short press function key
to light up the screen
When the device is turned on, touch the function key to light
the screen;
Whether the default clock page of the bracelet, you can
enter more menus to set different clock pages, no operation
default five-second screen
Switch to the heart rate three-in-one interface to start the
test, heart rate three-in-one interface 60s timeout
automatically off screen (heart rate and blood pressure need
bracelet hardware support)
Clock interface
After syncing with the phone, the bracelet will automatically
calibrate the time.；
（ tracks Step）
Number of steps
Wear the bracelet and record the number of daily movement steps
to view the current real-time steps.
Distance
The distance of motion is estimated based on the number of
walking steps.
Calorie
Estimate the calories burned based on the number of walking
steps
Heart rate, blood pressure, blood oxygen three-in-one
After entering the heart rate three-in-one test interface for
a few seconds, the current heart rate, blood pressure, and blood
oxygen test results are displayed. This feature requires a
wristband to support heart rate and blood pressure sensors
Multi-sport mode
After all exercise modes are activated, calories consumed and duration
can be recorded;
Sleep mode
When you fall asleep, the bracelet will automatically enter the sleep
monitoring mode; it will automatically detect the number of deep
sleep/light sleep/waking up throughout the night and calculate your
sleep quality; the sleep data bracelet will only view the total duration of
deep sleep and light sleep. For details, please View on the APP side.
Note: Sleep data will only be available when you wear the bracelet when
you fall asleep. Sleep will be detected from 10 o'clock in the evening.
Sleep data for 3/4 hours of falling asleep can be synchronized to the app
while you sleep.
music player
Successfully connected to the APP, the band can start the music player
(play/pause/up and down song function control)
the weather
If the APP is successfully connected, the bracelet can obtain the current
weather data, and the APP setting-personal information-can set the
temperature unit switch (the conversion between Celsius and
Fahrenheit)
Note: When connecting to the APP, please be sure to turn on the phone
location function
Custom watch face
You need to connect to the APP to get the dial settings, you can choose
the recommended dial/photo album custom dial to synchronize to the
bracelet
Temperature measurement
Please wear it for 15 minutes every time you use it to perform
temperature measurement, connect the APP to convert the unit,
and view the temperature data (the data is not uploaded without
APP or Bluetooth disconnection).
Note: The temperature measurement results vary according to the
ambient temperature, and the data is for reference only.
Information mode
When the bracelet pushes multiple reminder messages, enter this
interface to view the latest message record
APP function and settings
（Personal information)
Please set your personal information after entering
the app.
Settings → Personal Information, you can set gender
- age - height - weight
You can also set your daily goal steps to monitor daily
completions
（Application push）
incoming call:
In the connected state, if the call alert function is enabled,
when the call comes in, the wristband will vibrate and display
the name or number of the caller.(You need to give APP read
address book permission)
SMS notification:
In the connected state, if the SMS reminder function is
enabled, the bracelet will vibrate when there is a text
message.
Other reminders:
In the connected state, if this function is enabled, when
there is a message such as WeChat, QQ, Facebook, etc., the
bracelet will vibrate to remind and display the content
received by the app.(You need to give the APP permission
to get system notifications. The wristband can display
20-40 words).
Other functions:：
Turn on vibration to set this function,When there is a call,
message or other reminder, the bracelet will vibrate. If it is
closed, the bracelet will only have a screen reminder without
shaking to avoid disturbing.
Tips for Android users:
When using the reminder function, you need to set it
to allow "FitPro" to run in the background; it is
recommended to add "FitPro" to the rights management
and open all permissions.
（Alarm setting）
In the connected state, 8 alarms can be set. After setting,
it will be synchronized to the bracelet; offline alarm is
supported. After the synchronization is successful, even if
the APP is not connected, the bracelet will be reminded
according to the set time.
（Looking for a bracelet）
In the connected state, click the “Look for the bracelet”
option and the bracelet will vibrate.
(Remote photography)
In the connected state, the app end enters the remote camera
interface, shakes the wristband/turns the wrist, and
automatically takes a photo after 3 seconds of counting down.
Please allow the APP to access the album to save the
self-portrait photos. (Note: When taking a remote control photo,
the bracelet can not operate other functions, the app should
exit the camera function)
(Sedentary reminder)
Set whether to enable the sedentary reminder function, you
can set the reminder interval, if you sit for a long time
in the set time, the bracelet will remind.
(Raise your hand to brighten)
Turn this function on. When the wristband is in the state
of the screen, lift your wrist and turn the screen to
yourself to light up the screen.
(Do not disturb mode)
Turn on the Do Not Disturb mode. You can set the Do not
disturb time period. During the set time period, the
bracelet stops receiving notification messages to avoid
reminding messages.
(Device reset)
Setting this feature reset will erase all data in the
bracelet (such as step counting)
(Remove device)
Remove device This feature will erase data and remove
device
Basic parameters
Equipment type
smart
wristband
Type of battery
Lithium polymer
Vibration motor
support
method of
synchronization
Bluetooth4.0
Operating
temperature
-10℃~50℃
sensor
Low power
accelerometer
System
Requirements
iOS9.0 and above/Android 5.0 and above
Precautions
1.Bathing and swimming should not be worn.
2.Please Connect the bracelet when synchronizing data.
3.Use the included charging cable to charge.
4.Do not expose the bracelet to high moisture, high temperature,
or very low temperatures for long periods of time
5.The bracelet appears to crash and restart. Please Check
the phone memory information clear and try again, or exit
the APP and reopen it.
Component introduction
*Host *Wrist strap *Charging cable *Packing box and
instructions